Response SL5 Manuel d'instructions Page 37
- Page / 64
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
37
To change the setting press .
Enter the required delay period (10 - 240s).
Press to save new setting and exit, or
Press to exit without saving.
ENTRY DELAY BEEPS
Allows the systems Entry-Delay warning beeps when
arming the system to be switched ON or OFF.
Scroll through the system menu until ‘2.4 Entry
Delay Beeps’ (and the current setting) is displayed.
To change the setting press .
Press to enable the entry delay beeps, or
Press to disable the entry delay beeps.
EXIT DELAY BEEPS
Allows the systems Entry-Delay warning beeps when
arming the system to be switched ON or OFF. .
Scroll through the system menu until ‘2.5 Exit Delay
Beeps’ (and the current setting) is displayed.
To change the setting press .
Press to enable the exit delay beeps, or
Press to disable the exit delay beeps.
WIRELESS SIREN
Allows the wireless siren to be enabled or disabled.
If disabled it will not sound in the event of any alarm.
Default setting: ON
Scroll through the system menu until ‘2.6 Wirefree
Siren’ (and the current setting) is displayed.
To change the setting press .
Press to enable the wireless siren, or
Press to disable the wireless siren.
WIRED SIREN
Allows the hard wired siren to be enabled or disabled.
If disabled it will not sound in the event of any alarm.
(This does not affect the control panels internal siren
which cannot be de-activated unless the alarm
duration is set to 0).
Scroll through the system menu until ‘2.7 Wired
Siren’ (and the current setting) is displayed.
To change the setting press .
Press to enable the wired siren, or
Press to disable the wired siren.
AUXILIARY RELAY
Controls the operation of the auxiliary relay in the
event of an alarm occurring.
Scroll through the system menu until ‘2.8 Aux Relay’
(and the current setting) is displayed.
To change the setting press .
Scroll through the menu options, until the
required setting is displayed.
Options: OFF / 2s / 30s / 60s / 180s / 300s /
On-until-disarm
Press to save the new setting, or
Press to exit without saving.
JAMMING DETECTION
This controls the systems anti-jamming detection
facility. It is recommended that the jamming
detection is not activated for at least the first
30 days to allow time for you to become familiar
with the operation of your systems first.
Allows the control panels internal jamming detection
feature to be enabled or disabled. (The jamming
detection in the wireless siren cannot be enabled
with SK5 Platinum systems).
Default setting: OFF
Scroll through the system menu until ‘2.9 RF Jamming
Detection’ (and the current setting) is displayed.
To change the setting press .
Press to enable jamming detection, or
Press to disable jamming detection.
ENTER
ENTER
ENTER
ESC
1
3
ENTER
1
3
ENTER
ENTER
ESC
ENTER
1
3
ENTER
1
3
ENTER
1
3
- Wireless Security System 1
- FOREWORD 2
- CONTENTS 3
- KIT CONTENTS 4
- INTRODUCTION AND OVERVIEW 5
- TYPICAL INSTALLATION 8
- REMOTE CONTROL UNIT 9
- CONTROL PANEL 10
- INSTALLING THE CONTROL PANEL 11
- LINKING A REMOTE CONTROL OR 12
- REMOTE KEYPAD TO THE 12
- TESTING THE CONTROL PANEL AND 13
- REMOTE CONTROL 13
- PASSIVE INFRA-RED (PIR) 14
- MOVEMENT DETECTORS 14
- PIR DETECTORS 15
- TESTING A PIR DETECTOR 15
- INDEPENDENTLY 15
- LINKING A PIR DETECTOR TO THE 16
- MAGNETIC DOOR/WINDOW 17
- DETECTORS 17
- Detector 18
- Alternative 18
- Mountings 18
- Installer Access Code 19
- Walktest 20
- Waiting 20
- Zone X : MAG 20
- EXTERNAL SOLAR SIREN 21
- POWER-UP OF THE SOLAR SIREN 22
- IMPORTANT: 23
- DUMMY SIREN 24
- (Optional) 25
- TERMINAL BLOCK DETAIL 25
- TESTING THE SYSTEM 26
- DETECTOR TEST 27
- TEST FUNCTION SUMMARY 27
- 1 second 29
- FACTORY SETTINGS 31
- PROGRAMMING INSTRUCTIONS 32
- TELEPHONE APPLICATION SETUP 33
- USER SETUP 33
- System Setup Diagram 34
- SYSTEM SETUP 35
- LEARN REMOTE CONTROLS 35
- AND KEYPADS 35
- ALARM DURATION 36
- ENTRY/EXIT DELAY PERIOD 36
- ZONE LOCKOUT 38
- TIME & DATE SETUP 38
- DIALLER OPERATING MODE 38
- RINGS TO ANSWER PHONE 38
- ZONE SETUP 39
- LEARN DETECTOR CODE 40
- MONITORING SETUP 42
- Voice Dialler Setup Diagram 44
- LATCH KEY SETUP 45
- FRIEDLAND SPECTRA PLUS 47
- LIGHTING SETUP 47
- OPERATING INSTRUCTIONS 48
- 00.00 24.00 49
- E74: 13/03 14:23 51
- Z12 Smoke LowBat 51
- MONITORING (OPTIONAL) 52
- 0m 5m 10m 15m 53
- BATTERY MONITORING 54
- MAINTENANCE 56
- ALARM RECORD 57
- TROUBLE SHOOTING 59
- 0844 736 9149 61
- EXTENDING YOUR ALARM SYSTEM 62
- GUARANTEE 62
Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Response SL5
(28 pages)© 2020, manymanuals.fr. Tous droits réservés | 0.034 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels