PLANNING AND EXTENDING YOUR ALARM SYSTEM
Before attempting to install your Alarm System it is
important to study your security requirements and
plan your installation accordingly.
PIR Movement Detectors are used to protect the main
areas of the property, (e.g. lounge, study, hallway and
landing). Magnetic Door/Window Detectors are typically
used to protect the main access points to the property,
(e.g. front door, back door, patio doors etc). However,
they can also be used to protect other vulnerable
doors/ windows or access doors to important rooms.
TYPICAL INSTALLATION
The following example below shows a typical property
incorporating the suggested positions for the External
Siren, PIR and Magnetic Door/Window Detectors.
Use this as a guide for your installation in conjunction
with the detailed positioning requirements for each
device provided in the appropriate installation sections
in this manual for planning your intruder alarm system.
Typical Installation using only the detectors
supplied:
1. Place the 1st
Door/Window
Detector (configured
on zone 1) on the front door.
2. Place the 2nd
Door/Window
Detector (configured
on zone 2) on the back or patio doors.
3. Place the 1st PIR Detector (set on zone 3) and
the 2nd PIR Detector (set on zone 4) in two of
the following locations:
i) downstairs in the main living room containing
most valuables, or
ii) on the landing covering the access routes
between bedrooms and the stairs, or
iii) in the hall covering the Control Panel and
routes between downstairs rooms.
8
Commentaires sur ces manuels