Response SA5 E Instructions d'exploitation télécharger pdf (Page 25)

Telephone Application Setup.

If using any of the telephone based functions, (e.g.

Answerphone, Voice Dialler, Remote Phone Access &

Control etc) the Dial Method must be set according to

the exchange type, (i.e. Pulse or Tone/DTMF).

Voice Dialler Page 33

1) set Dial Method

2) set Dial Mode = “Voice Dialler”

3) set Voice Dialler Phone Numbers

4) set Dial Sequence

5) record Alarm Messages

6) set Call Attempts

Remote Manager Page 40

1) set Dial Method

2) set Dial Mode = “Remote Manager”

3) set Remote Manager Phone Numbers

4) set System ID Code

5) set Call Attempts

Answerphone Page 39

1) set Dial Method

2) set Rings to Answer Phone

3) set Answerphone Status = ON

4) record Greeting Message

Latch Key Page 38

1) set Dial Method

2) set Latch Key Status =

“ON” or “Selected-Users”

3) enable users if “selected users”

chosen

4) set Latch Key Phone Numbers

5) record User ID Message(s)

USER SETUP

This menu allows the 4 digit User Access Codes to be

congured for each user. The general users (1-6) may

also record a 4 second message to be used with the

Latch Key feature.

Note: For the Latch Key feature to operate correctly

the “Dial Method” (see System Setup) and the items

within the Latch Key Setup menu must be correctly set

and programmed.

Scroll through the top level programming menu until

’1. USER SETUP’ is displayed and press .

Note: After conguring all required users, press to

return to the top level of programming menu.

see SYSTEM

SETUP menu

see VOICE

DIALLER

SETUP menu

see SYSTEM

SETUP menu

see REMOTE

MANAGER

SETUP menu

see SYSTEM

SETUP menu

see ANSWER

PHONE

SETUP menu

see

LATCH-KEY

SETUP menu

see SYSTEM

SETUP menu

see USER

SETUP menu

Master User Access Code

8-1 Date

DD/MM/YY 000

8-2 Time

HH/MM/SS

PROGRAM MODE

Code:

7. PART ARM

SETUP

9. LATCHKEY

SETUP

8. TIME & DATE

SETUP

Enter new system line

HH/MM/SS

STANDBY MODE

Save & exit

Exit without saving

User 2 User 3 User 4 User 5 User 6

:1 Access Code

xxxx

Enter Access

Code:

:2 Record

User Message

:3 Replay

User Message

1-1 USER 1 SETUP

:1 Access Code

xxxx

1-7 MASTER USER

SETUP

PROGRAM MODE

Code:

Start...

YES->1 NO->3

1. USER SETUP

Enter Access

Code:

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 51 52

Commentaires sur ces manuels

Pas de commentaire

Response SA5 E Instructions d'exploitation Page 25

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Response SA5 E