Response SL5 Instructions d'exploitation télécharger pdf (Page 39)

PROGRAMMING

SA5

REMOTE MANAGER SETUP

The parameters in this menu configure the system

telephone dialler to interface to the Alarm monitoring

Service following the occurrence of a appropriate alarm

or system event.

Scroll through the menu until ‘11. REMOTE

MANAGER SETUP’ is displayed and press .

Note: After completing the Remote Manager setup

press to return to the top level programming

menu.

TELEPHONE NUMBER

Scroll through the menu until ‘11-1 Phone No:’ (and

the current setting) is displayed.

To change the number press .

Enter the new phone number (32 digits max).

Press to save and exit, or

Press to exit without saving.

UNIT ID

Scroll through the menu until ‘11-2 Unit ID No:’ (and

the current setting) is dispalyed.

To change the setting press .

Enter the 4 digit System ID Code obtained from the

Alarm Monitoring Service provider. (This is not to

be confused with the system house code or any

User Access Codes).

Press to save and exit, or

Press to exit without saving.

CALL ATTEMPTS

This sets the maximum number of times that the

dialler will attempt to contact the Alarm Monitoring

Service.

Default setting: 3

Scroll through the menu until ‘11-3 Call Attempts’ (and

the current setting) is displayed.

To change the number press .

Enter the required number of dial attempts (1-5).

Press to save and exit, or

Press to exit without saving.

ENTER

ESC

ENTER

ESC

ENTER

ESC

Notes:

Press to insert a 3.5s pause in the

dialling sequence.

Press to move the cursor left.

Press to move the cursor right.

Press to delete the number under

the cursor.

Press (and hold) to erase the entire

number.

Notes:

To enter code B, press , .

To enter code C, press , .

To enter code D, press , .

To enter code E, press , .

To enter code F, press , .

Note: For the Telephone dialler to operate

correctly with the Alarm Monitoring Service the

“Dial Method” and “Dialler Mode” (see system

setup) must be correctly set and programmed.

11. REMOTE

MANAGER SETUP

PROGRAM MODE

Code:

11-1 Phone No:

xxxxxxxxxxxxxxxx

Enter Phone No:

11-2 Unit ID No:

xxxxxxxxxxxxxxxx

Enter Unit ID:

11-3 Call

attempts:x

Enter 1-5:

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 51 52

Commentaires sur ces manuels

Pas de commentaire

Response SL5 Instructions d'exploitation Page 39

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Response SL5