Response SL8 Manuel d'instructions télécharger pdf (Page 32)

the Detector is in Test Mode with the battery

cover removed).

The indicator on the Control Panel can be

cancelled by pressing . The LED will start

flashing on receipt of the next low battery signal.

SPECTRA PLUS LIGHTING

If the Control Panel is liked to a Spectra plus

Lighting Receiver and the Spectra Lighting Control

is enabled then any alarm condition (except Fire

alarms) will cause the linked lighting to be switched

on for the set light-on duration.

Note: Spectra lighting signal to be sent each time a

Tamper or PA switch is triggered and each time a

detector on an enabled zone is triggered when the

panel is armed.

Spectra Manual - On/Auto switching:

Press to switch the linked Spectra lighting

ON.

Press to switch the linked Spectra lighting

OFF and back to automatic operation.

ESC

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 38 39 40

Pas de commentaire

Response SL8 Manuel d'instructions Page 32